| MAGNUM PROTECTIVE CASING |
| Standard cases are constructed of 7- ply, void free birch plywood with an ABS laminate. Baltic birch and high pressure laminate option is available at an increased cost. All cases are available in 1/4", 3/8", and 1/2" panel thickness and assembled to better than ATA specifications. Latches and corners are offset for a better fit and greater strength. Steel backing washers are used where necessary such as handles, corners and latches. Mitered corners are a thing of the past thanks to a new cast corner clamp. No more separated tongue and groove on the corners! 5/16" bolts are used to attach casters. (3/8" on larger casters) A lot of companies use cheap 1/4" bolts, usually carriage bolts. All bolts used on Magnum cases are minimum 5/16" serrated flange bolts. Several longer flange bolts pass all the way through the casterboard, through the case into a special tee nut that is mounted to the inside of the case with screws. Should a bolt ever work loose or break it is easily replaced. Worn casters are easily replaced in the field as well. All foams used are of 2lb density. Doghouses in console cases are not mechanically attached to the case. They float on foam all the way around and in fact can be taken out of the case very easily. |
| Available options include locking latches - both padlock and key, locking casters, lightweight panel, quick release caster plates, swing-open doors in place of standard lids, slam latch lids, flush lids, stacking cups, stacking corners, custom graphics, and custom I/O and AC panel work. |
| Rack-mount mixer w/ 12 space shock rack below. Front cover converts to worktable.This case also features 6" wheels for easy rolling on fields and a slam lid on the rear. Provided for Colorado State marching band. |
Custom graphics work and stenciling available
Stacking tray option
| Tour grade console cases. With or without doghouses. Call for quote. |
| Case for Allen & Heath GL4800-848. Doghouse features a hinged top lid plus two slam latch covers on the rear for additional access without opening the top lid. Top lid has matching Wilson Art laminate on the top surface for durability and good looks.The doghouse is finished with a two part epoxy. Doghouses are not bolted into the case. They ride on a minimum of 2" of foam. When the console is transported on the wheels a full 2" of heavy-duty shock foam cushions the rear of the doghouse and the console. |
| Bolts used on all Magnum cases are 5/16" or 3/8" locking flange bolts. |
Rolling head case for a 1971 Ampeg SVT
719-784-4820
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| MANY CASES ARE AVAILABLE CONSTRUCTED WITH LIGHTWEIGHT MATERIAL |
| The extrusions we use allow rivets to pass through the outside leg, through the panel and finally through the inside leg for a strong attachment. |
| See the difference? These are what most case companies use |
Customer's rig in Magnum cases
| ATA RACK CASES, ISO-MOUNT RACK CASES, INSTRUMENT CASES, POP-UP MIXER RACK COMBO CASES, DJ EQUIPMENT CASES, LCD CASES, TURNTABLE CASES, TRUNKS, FLAT SCREEN CASES, PROJECTOR CASES, UTILITY CASES, CONSOLE CASES, CUSTOM CASES FOR MOST ANY APPLICATION AND MUCH MORE. |
Tech Work Station
| Custom pedal board case with Powercon AC inputs on the right and left sides |
